Month: February 2024

bookmark_borderDifferent Double-Hira

Posted on by Elliott Evans

Following up on the previous double-hira, which expanded the 8-strand flat braid to 16 strands by having 8 groups of 2 instead of 4 groups of 2, I decided to try the braid with 4 groups of 4. Here’s what the pattern looks like:

16-Strand “Double Hira” Gumi A

Note the asymmetrical first move. Here is what the braid looks like:

Double-Hira Gumi A in black and gold silk

I really like the look of this braid. Interestingly, the braid is much thicker along one edge than along the other. I just love the look of those zig-zag chevrons, and the stitches come out really tight.

I didn’t post a pattern for the previous double-hira, so here it is, for comparison:

16-Strand “Double Hira” Gumi B

It sure looks more confusing, but it’s the same moves, just with more groups.

bookmark_borderDouble-Hira Braid

Posted on by Elliott Evans

So, if you remember my posting from about a year ago, sometimes I experiment with 8-strand braids that I have never tried a 16-strand “doubling” of. I was really happy with my doubling of the yatsu-se gumi, but for some reason I never thought to try a doubling of the 8-strand version of the shige-uchi braid (which is not really a shigeuchi at all) until now. Here is the pattern for the 8-strand braid:

If you expand the setup to 16 strands (with 8 groups of 2 instead of just 4 groups of 2) but keep the asymmetrical first move, the braid open up what would have been a naiki gumi round hollow braid into a wide, flat braid with a single layer plain weave,

16-strand flat braid in black and gold silk

I suppose this should be called the hira ju-roku gumi or “flat 16″ braid. The width of this braid varies due to variations in tension, but it averages about 5/8” (about 15mm) wide, which is very wide for a marudai braid. Mine came out very loose, but that may have been a function of the marudai I was using. For a braid this wide, I really should have used a marudai with a deeper “well” and a wider hole in the middle of the mirror. Anyway, the looseness makes this braid very soft and flexible.

bookmark_borderElectric Andon

Posted on by Elliott Evans

I have made quite a few wooden frame lanterns, called andon in Japanese, but most of them were designed around battery-powered lights of one kind or another. The battery-powered LED lights look great, but they are not nearly as bright as regular electric bulbs run off AC power. So, since our camp at Pennsic has AC power at least most of the time, I decided to make some new andon around high output (1000 lumen) LED bulbs.

Three Electric Andon

These are the first three I made, hanging in the shourou. Look at how bright they are! I bought some black appliance cords at the Lowes, then spliced outdoor light sockets onto the ends. The cords are probably overkill electrically, but they come with molded plugs already on one end and stripped wires at the other. Perfect for projects. The lantern actually hangs from the fixture.

Here’s the one I made as a present for Sharon. This cord is a little longer than the others to enable this specific hanging arrangement. There is a switched outlet right at the base of the windows next to the front door.