So what did the little collection of tools on a stool look like at the end of the project?
You can see I’ve added a sashigane, a larger ruler, a socket awl and a drilling block. The awl is useful for making a hole where the brad point of a drill bit can go to keep the bit from skating around as the hole gets started. The block keeps the drill bit perpendicular to the surface of the wood as the hole is drilled. The other black plastic thing is a right-angle block.
I’ve been working on a new large carpentry project, and it involves a bunch of joinery that for some reason I have decided to cut by hand. Everything needs to be measured out and marked, regardless of hand or machine cut, since I almost never trust jigs or templates for this kind of thing. Here’s the kit of measuring and marking tools I have assembled for this particular project.
So yes, there are three adjustable squares here, so that I don’t have to keep setting and re-setting them for the different lengths I need. The tool right in the middle is called a wheel gauge. You set the length you want, run the large brass bit against the edge of the board, and the little metal wheel at the end cuts a groove in the wood. I do have a Japanese kebiki gauge, but I have a difficult time getting accurate distances with it. The larger aluminum tool next to the wheel gauge is a modern Japanese marking square that is awesome because the large sides let you mark around the corners of lumber, so it’s easier to get straight cuts on 2x4s and other similar pieces. The small metal ruler is very useful for drawing lines between marks, and inserting into small holes as a depth gauge. I mostly mark things out in pencil using the blue 2mm drafting lead holder. but the pocket knife in the upper left is helpful for cutting a groove to start saw cuts, particularly on rip cuts.
