bookmark_borderChalk Holder for Gate

When I made a new entrance gate for the Debatable Lands camp at Pennsic, one of the little extra things I did was attach a chalkboard panel to one of the inner posts. This gave the people in camp a way to communicate what the day’s schedule and menu would be. I put some chalk in an old Altoids tin so it wouldn’t just be hanging out.

The chalkboard was a good thing, but the tin was not. It got all wet and rusty, plus the fabric I put inside to keep the chalk from rattling just got all wet and mildewed. So, it was time to make a better chalk holder. Here’s what I came up with.

Wooden box for chalk holding
Chalk Box from Sycamore

A couplefew years earlier, I had ripped a fallen branch from one of the sycamores into thin boards. I figured this was as good a chance to use them as any. I had a rough plan for what it was going to look like, but I mostly plaed it by ear as to how big each piece was going to be. I tried to keep the bark edges of each piece, just to give it that rustic aesthetic. The sycamore sure did scortch on the cuts, but I figured that would add to the rusticity, and made seal the end grain a little bit since I was not planning on applying any finish.

After gluing and nailing the box together, I made a fabric hinge from some waxed canvas and tacked it into place. A hole drilled through the back panel will enable me to hang it from a nail or screw.

Sycamore chalk holder with lid open to show chalk inside
Chalk Holder with Lid Open

Anyway, just a quick little project for fun. The weather will probably ruin it in a year or two, then I (or somebody else) will get to make a new one. Since the lumber was basically free, this project probably cost less for materials than the chalk inside it.