bookmark_borderChalk Holder for Gate

When I made a new entrance gate for the Debatable Lands camp at Pennsic, one of the little extra things I did was attach a chalkboard panel to one of the inner posts. This gave the people in camp a way to communicate what the day’s schedule and menu would be. I put some chalk in an old Altoids tin so it wouldn’t just be hanging out.

The chalkboard was a good thing, but the tin was not. It got all wet and rusty, plus the fabric I put inside to keep the chalk from rattling just got all wet and mildewed. So, it was time to make a better chalk holder. Here’s what I came up with.

Wooden box for chalk holding
Chalk Box from Sycamore

A couplefew years earlier, I had ripped a fallen branch from one of the sycamores into thin boards. I figured this was as good a chance to use them as any. I had a rough plan for what it was going to look like, but I mostly plaed it by ear as to how big each piece was going to be. I tried to keep the bark edges of each piece, just to give it that rustic aesthetic. The sycamore sure did scortch on the cuts, but I figured that would add to the rusticity, and made seal the end grain a little bit since I was not planning on applying any finish.

After gluing and nailing the box together, I made a fabric hinge from some waxed canvas and tacked it into place. A hole drilled through the back panel will enable me to hang it from a nail or screw.

Sycamore chalk holder with lid open to show chalk inside
Chalk Holder with Lid Open

Anyway, just a quick little project for fun. The weather will probably ruin it in a year or two, then I (or somebody else) will get to make a new one. Since the lumber was basically free, this project probably cost less for materials than the chalk inside it.

bookmark_borderChalk Holder

For those of you who, either at my recommendation or independently, purchased the “Dritz Chalk Cartridge Set” chalk holder, or (perhaps more so for you who) did not purchase the Dritz model because it is made of plastic, it should be noted that the chalks that come with the Dritz holder are 3.8mm in diameter, and can be inserted into the “Koh-I-Noor 3.8mm Clutch Pencil 5356″ which is made of metal.

Dritz (top) and Koh-I-Noor (bottom) 3.8mm Holders

I have never seen the Koh-I-Noor 5356 in any store, but it is available from several online retailers. I won’t attempt to bias you for or against any particular retailer. The down side are that the 5356 does not come with a supply of chalk or a sharpener.

I have yet to compare the Koh-I-Noor colored artist’s leads to the Dritz chalk sticks in terms of marking and washability. So far, the Dritz chalks have lasted several years and one pack may be a lifetime supply.