bookmark_borderBlock Printed Tenugui

In discussion within Clan Yama Kaminari, we thought it would be nice to have some tenugui hand towels printed with the Clan mon. I already had the printing block cut, so It was only a couple days’ work to make two dozen of these.

Cotton hand towels printed with the mark of Clan Yama Kaminari

Each tenugui is a yard long and about 15 inches wide. I used cotton muslin because it was on sale at the fabric store. Typically, tenugui use a looser weave of cotton.

I did a rolled edge on each rectangle using the serger to keep them from fraying. Tenugui made with traditional fabric have selvedges at the proper width, and the ends are just left to fray. If I buy tenugui, I usually hem them myself.

The mon is block-printed at each end, centered in the width of the fabric, using Jacquard Textile Color in “Ruby Red”. This pigment yields a good solid color, without changing the texture the way paint would, or bleeding along the fibers the way dye would.

bookmark_borderMore Fabric Printing

Spent the last two days prepping fabric and planning, and spent the whole morning block-printing some fabric.

Drying

Now, every available surface in my office is draped with fabric. There’s very little bleed through the fabric, and the printing is actually thin enough that it does not run or drip, and dries quickly. I used Jacquard “Textile Color” with “Air Fix” additive. Even so, I will probably spend tomorrow heat setting with an iron just in case.

All in all, I did almost 100 impressions of the badge today, and another dozen or so impressions while testing. This is all from just one of those little 2.25 fluid ounce jars of paint. There’s still some paint left, too.